Fits: Harley Davidson Big Twin Models 1999-2006
S&S® highly recommends installing a performance cam for easier starting and better engine performance.
S&S high flow cylinder heads will provide further horsepower gains and are machined for installation of manual/electric compression releases.
With no need to rebalance flywheels, bore crankcases, or bore cylinders, this kit is about as easy as it gets. Consisting of the largest bore we feel can safely be used in a cylinder with a stock spigot diameter, this kit brings a new definition to the term 'big bore'.
FEATURES AND BENEFITS
Largest bore we feel can safely be used in a cylinder with a stock spigot O.D.
Bolt-on 9 to 10 cubic inches – cylinders do not require crankcase machining to install
Piston weight for 97"" & 106"" kits are the same as stock, requiring no flywheel rebalancing
Forged coated pistons are compatible with stock or S&S Super Stock® 89cc heads
Valve pocket recessed in S&S pistons are enlarged for oversize valves and higher lift cams
Silver or black wrinkle powdercoat cylinder finish color matches stock Harley-Davidson® finish
- Piston set with rings
- Top end gasket kit
- S&S cylinders
- Displacement - 97""
- Stroke - 4""
- Bore - 3.927""
- Cylinder Length - 4.937""
- Piston Type - Forged
- Stock Compression Ratio - 9.7:1
- 89cc S&S Compression Ratio - 9.4:1