Kisan Headlight Modulators will definitely get your motorcycle noticed on the highway during daylight hours! These plug-n-play modulators are a popular safety addition that work on hi-beam and functions as a switch. Once plugged in, you simply select the hi-beam to modulate and the hi-beam will flash or modulate during daylight hours and switch the headlights in the "On" position once it cannot see enough daylight, if you enter a tunnel or darkness falls. Because the modulator is a microprocessor, it also allows for customization. So, get noticed and stay safe on the road with a Kisan Headlight Modulator for your bike.
Features:If you turn the high beam on and then turn the ignition on three times quickly, the sequence is interpreted as an active command to change the sensitivity
Current software version v.823A allows 8 linear steps between the high and low end
The daylight sensor has a low frequency filter to avoid false triggering. Please note that florescent lamps may not trigger the sensor - it needs constant incandescent light
pathBlazer uses a soft-switching technique. It throttles the current flow through the bulb filament, so that there's no "thermal shock" due to a sudden inrush of current, which can damage the bulb filament or shorten its life considerably. This is far superior than maintaining a small voltage!
Select hi-beam to modulate - as long as there's sufficient daylight. If you enter a tunnel or if it gets dark, it will stop the modulation of the hi-beam and stay ON steady. Select lo-beam to end modulation
You have complete control
Made in the USA
Kisan pathBlazer Headlight Modulators are totally self-contained. There are no hidden boxes or switches. There are no wires to cut or splice. Each unit is designed for a specific model bike or headlight design with H4 or H7 bulbs and require NO ADDITIONAL SPACE after it's plugged on the back of the bulb.
Kisan PathBlazer circuit modulates the hi-beam current from 100% ON to about 17% OFF. This is accomplished by using a p-channel MOSFET, which is inherently safe. The MOSFET is designed to fail in the ON state. For additional safety, the circuits DO NOT utilize the lo-beam whatsoever!
MAX power rating is 115 watts. DO NOT EXCEED!
Each modulator comes with a detachable daylight sensor, which simply plugs into the pathBlazer. The daylight sensor functions as a switch; it stops modulation when it cannot see enough daylight. Since the internal circuitry is controlled by a microprocessor, it allows for customizable features.
Programmable Daylight Sensor
150GW Light Modulator - Fits Honda GL1500
P115W-D Light Modulator - Fits Honda GL1800
P115W Light Modulator - Fits Bikes with Single H4 or H7 Bulbs
P115W-S Light Modulator - Fits Bucket style headlights with H4 or H7 Bulbs