The RSD 1"" Clip-Ons mount to 49mm front forks, below the top triple clamp, for a low handlebar position. The aluminum bars are dimple milled to allow for stock wiring to cleanly exit your stock switch housings.
- Adjustable to any pullback and any height between top and bottom triple clamps with a fixed 5 degree down angle
- Replaces top mounted handlebars and risers
- Bar is 1” diameter to accept stock or aftermarket hand controls and the bars are slotted for external wiring.
- May need to shorten, cut and/or solder wiring, depending on current bar height
- Interchangeable RSD Logo Badges (Black & Brass)
- Made in the USA