The Oxford Heaterz Premium Sports heated handlebar grips are made especially for sports bikes. The grips have ergonomically engineered surface structures to optimize riding performance. Soft, ultra-grippy diamond tread is inspired by race grips for comfort and feedback. The grip length is 4.84â€ (123mm) but can be trimmed to 4.48â€ (114mm) if required and has open ends for bar end weights. What really sets the Oxford Heaterz apart? The answer is many tried and tested features such as the silicon cables which provide flexibility in the coldest weathers and the winter grade wiring prevents cracking and short circuits; the bonded grip design has been in use for many years and is well proven; the grip compound and thermo plastic rubber construction is designed to absorb vibration making them extremely comfortable and durable, often outlasting standard grips and the silicone wires that come from the grip are angled to eliminate water ingress and resulting corrosion/ice damage and have special unique internal supports which are heat shrunk together to prevent damage if the wires are snagged. In addition, five carefully chosen heat settings allow the perfect temperature to be selected in ALL weathers and most importantly, the switch will switch off if the voltage drops to 10.5V to ensure that the battery is not damaged to the point that it cannot be fully recharged.
This latest Premium range is the result of over 30 years of research and development by engineers and motorcyclists, which are now easier than ever to fit due to the new intelligent heat controller eliminating any need to wire the positive to a live ignition feed; simply connect the 2 ring connectors to the battery. You'll find everything supplied by Oxford to fit your Heaterz from a wiring loom with ring connectors to the battery with simple plug and play connectors to attach to the switch and grips, smart mounting bracket and switch right down to the glue and cable ties all neatly packaged in one box.
2 Year Warranty
Sealed for life
Up to 122Â°F (50Â°C)
Draws under 4A
5 heat settings give the perfect operating temperature with LED lights to indicate the level
These Premium Sports Heaterz are designed as a replacement for the handlebar grips already fitted to the motorcycle. The Sport version fits standard 7/8" handlebars and clip-ons and has ergonomically engineered grip pattern to optimize riding performance. Each grip has an open end to allow the bar end weight to be refitted without the need to trim the grip. The standard length of the Premium Sports Heaterz grip is 4.84" (123mm). Should the length need to be shortened, they can be trimmed to a minimum length of 4.48" (114mm) without damaging the heating elements. The soft, ultra-grippy diamond tread is inspired by race grips for comfort and feedback.
Intelligent heat controller features:
5 heat settings (30%, 40%, 50%, 75% and 100%) with LED lights to indicate heat setting
Sealed-for-life welded case for long-term durability and weather proofing
Battery Saving Mode turns grips off if you forget or if battery voltage falls too low
Raised and tactile silicone buttons for use with gloved hands
What's in the box:
Throttle and clutch side Touring pattern grips
Intelligent Heat Controller
Metal bracket and hardware for mounting controller
Wiring harness with 5 amp mini-blade fuse, zip-tys and grip glue
Instruction booklet and 2 year warranty card
Fits 7/8" (22mm) handlebars and clip-ons
Standard length 4.84" (12.3cm) Trimmable to 4.48" (11.4cm)
Grips are open ended to allow for bar-end weights and/or handguards
Current drain: Average 3.6 amps per pair (up to 2.0 amps each - 28-30 watts)
Fuse: 5 amp mini-blade (available in most auto parts stores)
Intelligent Heat Controller draws only 71 micro amps (0.071mA) in standby mode
Requires only standard tools. No splicing, crimping or soldering needed. Connects direct to battery with ring terminals.