Plasma Rods™ use a patented technology that produces a bright, incredibly smooth light output, unlike anything you have seen before. Plasma Rods™ can be used about anywhere but they work great as turn signals or brake lights located between your bags and your fender/filler panel or as a third brake light located under your tour pak. Use one of our Run-Brake-Turn controllers to allow your Plasma Rods™ to function as running, brake, and turn. Plasma Rods™ are available in four different lengths 8"" or 10"" or 12"" or 14"" x 0.3"" x 1.0"" and mount with 3M automotive grade tape that is included. With their smoke lens, Plasma Rods™ are almost invisible when off, and bright red with illuminated. Works on all 12VDC negative ground systems. Single intensity 2 Wire design, use Eclipze™ Module or dual converter to convert to dual intensity. Use 8"" for standard bags and 10"", 12"" or 14"" for extended bags.
- Low Intensity Red Running, High Intensity Red Brake, High Intensity Yellow Turn Signal - All in one Sleek Plasma Rod
- Dual Converters Included, No Modules Required
- Red Running or Brake will turn completely off when the corresponding turn signal is activated giving turn priority over running and brake.
- Wiring is a Simple as Connecting Orange Wire to Running Light, Red Wire to Brake Light, Yellow Wire to Turn, Black to Ground
2014-2016 Street Glide, Street Glide Special, and 2015-2016 Road Glide/Road Glide Special require our Turn Signal Decoder