Hey this is Reuben with Competition Accessories and we just wanted to make a quick video on how you change the face shield out on the Arai helmet. A lot of people get intimidated by Arai helmet face shields because of the side pod they have where you cant see whats going behind it. What we have done on this helmet here is we installed a clear pod so we could give you a better look at the inner workings of the base plate mechanism and show you how it works. Basically to remove the face shield what I want you to see is this little gray lever here, there are one of those on each side of the helmet. When you raise your shield to the top position those will pop out. Now if your helmet is a little older or a little worn out they might not pop all the way out like a brand new helmet. With the face shield all the way up you just need to lift those levers all the way up. Once you have lifted those until they click, to take the shield off is very simple, you are just going to grab it from the top , rotate it back and pull it off. It comes right off really quickly. You will see guys out at the track if you watch racing at all like the isle of man for instance, they will pull into the pits and they swap face shields on or off in just a matter of seconds. It is one of those things you have to get the hang of. To reinstall the shield is a little trickier, there is a horse shoe shape cut out on the end of the shield here, that's going to line up with the top curve on the helmet or the pod and with the clear ones you can see the round tab that its going to slide over. Your going to slide that in on both sides and its not going to really click or anything, you just have to get it down and on to there like that. Once its in I find it easier to have the helmet facing away from you and then you are just going to close the shield. When you close the shield what happens is this opening this cut out right here slides over that little notch right there, so that is what limits the shield as It opens. That's how to change the Arai face shield out, hopefully that helps you out. You can go to our youtube channel if you click on this link in the upper right hand corner and subscribe to us. We have a lot detailed videos on helmets and other products. You can also check us out on facebook and check us out online, see you next time.
The new Pinlock ProTec Tint Insert is able to change from crystal clear to tinted in a matter of seconds.
Changes color from clear to tinted
Changes color in seconds
Perfect for all weather conditions
No need for a different color insert
Deals with low sun
Fits all Arai & Shoei pinlock ready visors
Trusted Pinlock Quality and performance
Providing the ultimate comfort and convenience such as;
NEW Pinlock 100% Max Vision
This new type of insert is fully integrated in the helmet visor, false light penetration will be impossible and is also a good alternative to a coloured or tinted visors. All these features give increased safety for every rider.
An air tight double paned chamber is created between the visor and the insert. This chamber levels the temperature difference between the inside and outside the helmet that is the cause of fogging.
Review this Product
for a chance to win a $100 gift card.
Protec-Tint Insert - Steve K
Recommended by Reviewer: No
Cons: Doesn't work.
Just spoke to Pinlock. All US spec shields have UV protection, thus the photochromic properties of the insert are hindered. Its back to carrying two shields on long rides. Too bad, great idea, wish they mentioned that in the sales literature.
||Currently Not Available for Order