Competition Accessories FREE Shipping Customer Service Login Account View Cart Why buy from us?
Product Search
Arai - Arai SAI Replacement Mirrored Iridium Shields and Visors Arai - Arai SAI Replacement Mirrored Iridium Shields and Visors Arai - Arai SAI Replacement Mirrored Iridium Shields and Visors
Arai SAI Replacement Mirrored Iridium Shields and Visors


No Hassle Returns and Excchanges
Lowest Price Guarantee on Arai SAI Replacement Mirrored Iridium Shields and Visors

+ Add Your Review
for a chance to win a
$100 gift card.

You may be interested in:
All Colors - Arai SAI Replacement Mirrored Iridium Shields and Visors
Iridium Silver - Arai SAI Replacement Mirrored Iridium Shields and Visors
Iridium Blue - Arai SAI Replacement Mirrored Iridium Shields and Visors
CLICK here for Zoom images of the Arai SAI Replacement Mirrored Iridium Shields and Visors

Video Reviews
Hey this is Reuben with Competition Accessories and we just wanted to make a quick video on how you change the face shield out on the Arai helmet. A lot of people get intimidated by Arai helmet face shields because of the side pod they have where you cant see whats going behind it. What we have done on this helmet here is we installed a clear pod so we could give you a better look at the inner workings of the base plate mechanism and show you how it works. Basically to remove the face shield what I want you to see is this little gray lever here, there are one of those on each side of the helmet. When you raise your shield to the top position those will pop out. Now if your helmet is a little older or a little worn out they might not pop all the way out like a brand new helmet. With the face shield all the way up you just need to lift those levers all the way up. Once you have lifted those until they click, to take the shield off is very simple, you are just going to grab it from the top , rotate it back and pull it off. It comes right off really quickly. You will see guys out at the track if you watch racing at all like the isle of man for instance, they will pull into the pits and they swap face shields on or off in just a matter of seconds. It is one of those things you have to get the hang of. To reinstall the shield is a little trickier, there is a horse shoe shape cut out on the end of the shield here, that's going to line up with the top curve on the helmet or the pod and with the clear ones you can see the round tab that its going to slide over. Your going to slide that in on both sides and its not going to really click or anything, you just have to get it down and on to there like that. Once its in I find it easier to have the helmet facing away from you and then you are just going to close the shield. When you close the shield what happens is this opening this cut out right here slides over that little notch right there, so that is what limits the shield as It opens. That's how to change the Arai face shield out, hopefully that helps you out. You can go to our youtube channel if you click on this link in the upper right hand corner and subscribe to us. We have a lot detailed videos on helmets and other products. You can also check us out on facebook and check us out online, see you next time.
Hey guys this is Reuben with Competition Accessories and welcome to our video review of the all new Arai Vector 2 helmet. This is Arai's entry level helmet and when I say entry level its still going to be a premium helmet. Its going to have the same complex laminate construction, so the shell is still going to be that hand laid fiberglass which is extremely and incredibly stiff. One thing that you see on all Arai helmets is this hyper ridge that is molded into the shell itself. This allows them to make the opening of the helmet a little larger so you can get the helmet on and off easier and still have a helmet that fits snug. Another thing that it does is it adds additional stiffness along the base of the helmet. This is a weak spot on the helmets because its open. If you have an impact here that hyper ridge is really going to reinforce the helmet. It also serves as a shock wave buffer so if you hit up here that energy wave is going to be reflective back up and not continue down towards your body. Looking at the aerodynamics of the Vector, there are some differences between the Vector 1 the older version to the Vector 2. First thing they changed was the chin vent. It doesnt really look a whole lot different from the outside but the Vector 2 has more channeling for that air to get inside the helmet to your face and the face shield. They have redesigned the air wing on the back so if you look at the original Vector and the Vector 2, the Vector 2 actually has scoops at the back of the wing that are going to pull more air over the back of the helmet and these vents draw all the warm air out of the helmet which is the most effective ways to cool off the inside of the helmet. There are also some small static vents at the back towards the base of the helmet. Another thing that they have changed on the Vector 2 is the new face shield is going to be wider. It is a wider eye port so you have better vision. Out of the helmet itself it still has those brow vents that are built in, so talk about the ventilation you have a chin bar vent which has two positions, then you have brow vents. Instead of having vents up on the brow of the helmet itself they put them in the face shield and the reason they did that was because they don't want to compromise the integrity of the shell. You can see that the brow vents are directed through these air channels. Those direct the air down around to your fore head so you get some nice air flow there. This top vent is closeable with a simple slider switch and it operates easy with gloves. The same thing goes for the back you can open and close these rear vents and its actually two positions with that slider switch. Moving on to the inside of the helmet. Arai has actually changed a lot about the inside of this helmet as well. The original Vector just had removable cheek pads. The Vector 2 has a fully removable interior. You will see the neck roll is nice and flush, that helps keep the wind noise down. We will go ahead and remove the cheek pads here. Another thing Arai does with their helmets is they give you an option to take some foam off of the cheek pads, so rather than having to buy a thinner cheek pad you can actually tear away this top layer of foam, its called their micro fitting cheek pads. Pull that off and that's going to give you an extra 5 mm of room up in the cheek pad area. Another thing they may notice is they use multiple densities of foam. You have different types of foam and they are contoured to fit your face. They are also springed as you can see when I push it forward, that helps when you are taking the helmet off. Arai does not use snaps on their cheek pads they are basically little tabs one on each side of the cheek pad. To remove the crown liner it is just basically four snaps, two in the front and two in the back. You can take the whole liner out, you can wash it and replace it. Another part of Arai's micro fit system is the tear away temple pads. This allow you to get a little extra room in that area, so if you feel like there is too much pressure on the sides of your head you can actually tear these off of the interior of the liner. On the inside of the helmet you have Arai's single piece EPS liner, which is basically multiple densities of foam but they mold it into one liner piece so you don't have different pieces of foam inside the helmet. Check out this helmet it is definitely a great option if you don't want to spend the money on higher end race helmets from Arai. You can subscribe to our youtube channel by clicking on the link in the upper right hand corner to watch all of our latest product and video reviews. Also check out our facebook page, and you can take a look at the Vector 2 on our website at Competition Accessories. We will see you next time.
Hey guys this is Reuben with Competition Accessories and welcome to our review of the Arai RX-Q. Now if you have been around on our website for a while you may have seen the older Arai RX-Q video we had and it was out of date and I wanted to do a better one, the older one was from before my time so lets get into the details of the Arai RX-Q. Arai calls it the ultimate street helmet, they have taken a lot of inspiration from the RX-7 line or the Corsair V which is their high end race helmets. It is a replacement for the Quantum 2 which was a very popular helmet choice. It is an all new model, if you are in Europe you probably know this one as the Quantum ST. Some specific changes from the Quantum 2 in mainly the head shape. Unfortunately a lot of riders are not happy with that, if you have a very round head shape in other words you have a lot of width to your head and just a very round shape, that's what the Quantum 2 was designed to fit. The RX-Q is an intermediate oval, so if that's your case and you want an Arai helmet the RX-Q is going to be your best bet in that line up. The intermediate oval is what Arai finds to be what most people are most comfortable wearing. You are going to spend anywhere from 500 to 700 dollars on the RX-Q depending on the graphic or the solid that you go with. First of all lets talk about the weight I have a scale we can throw it on and you can see it is fairly average for a motorcycle helmet, it is 3.5 lbs. This helmet is not super heavy but also not super light either. However when you have this on your head, it is designed for comfort, long distance riding, and high performance riding as well. The reason it doesn't feel super heavy when its on your head is it actually has a very low center of gravity and that's thanks to this hyper ridge that is built in along the base of the shell. Arai also does something that is unique that a lot of other helmet manufacturers don't do is they maintain the same shell thickness all the way down to the bottom of the shell. That provides again a low center of gravity but also some additional support and structure in the base of the shell. That hyper ridge also provides an additional level of rigidly along the base of the shell, so if you take a hit along this area on the shell, the shell is designed to spread impact so its going to spread that impact as far as it can so you don't want it to continue down passed the shell. Sometimes you can see a less expensive helmet in a bad crash will leave a crack down in this area here because there is no more support for the shell to continue to spread that impact. This hyper ridge will help transfer that impact back up the helmet so its not transferred to your body. I have a raw shell here that is a unique thing to take a look at and it is an RX-Q shell and it is actually hand laid fiberglass. All Arai helmets are hand made and they have true artisans and craftsman that build these shells to exact specifications. These helmets go through three separate quality control checks throughout there manufacturer and they do some really neat things. Not only that hyper ridge along the base of the shell but also peripheral belting. Anytime you have any kind of hole in the shell for ventilation or for the face shield it is a weak point so they provide additional belting along those areas to provide additional rigidity to the shell so they can manage that impact as best as possible. Another thing you can see is they take the same shape as an egg and that's something Arai has done for years, the rounder the helmet the more strong it is going to be and also your not providing for any means of catching on the pavement or the ground in a form of a crash. The purpose for that is so it will slide right along the ground and wont catch and cause even more injury because of it catching. Even the vents on the top of the helmet and the spoiler on the back are designed to break away in an accident. They are attached with basically and industrial double sided tape so it is stuck on very well for regular use but in accident it will break off. Taking a look at the inside you can see the reinforcement here, they do put on a spoiler and drill holes for the vents. Again just a very very strong shell construction. Last thing I want to talk about on this raw shell is you can see where most helmets have a significant recess where they would install the base plate mechanism for the shield, you may notice all Arai's use this pod system which is essentially a cover over the base plate and that's because the base plate does not sit or does not have a home in the shell. It has a very shallow recess where that goes where as most helmets use all sorts of springs and other things to clip a shield in which requires a little bit more of a detente in the shell itself. Arai's method is to try and keep that round organic shell shape consistent so you don't compromise on the shell strength and protection. The EPS liner is no different it is a one piece EPS liner and the one I have here has several different colors that's not what you would see traditionally from the factory, they usually cover them in a black coating. This one details the different types of foam that are used and you can see its the one piece liner so a lot of times you will see other manufactures claim they have a two piece EPS liner or a multi-density EPS liner where what they have found over the years in all helmets different impacts require different types of foam. When we see a serious impact you want that foam to be able to absorb the impact along with the duration of that impact which is going to require a firmer foam or multiple impacts that Snell 2010 requirement is for it to absorb the same impact multiple times. The liner takes different densities of foam especially along the face shield area and chin bar. The biggest thing with Arai is it is a multiple density one piece liner. They do not use any glue on softer foam they make it so everything works as one and uniformly. Lets talk about the ventilation it is fairly straight forward it does have some really nice features to it. You do have a chin bar vent that directs air up onto the face shield to prevent fogging. There are pinlock shields available for this no anti fogging coating on the inside of this helmet so it will fog up on you if you don't do something about it you can get the pinlock insert and that is just the way Arai has chosen to go with there anti-fog, the advantage there is no anti-fog coating to wear off over time. Arai face shields do run a little bit more money as well. A lot of that is thanks to the face shield vents. The reason they put these vents on the face shield so it does not compromise the safety of the helmet. They know that the shell is already weak due to the eye port so they did not want to take any more away from that shell construction. The vents on the face shield channel the air through air passages that go throughout the helmet. This also vents to your temple area where a lot of helmets fail to direct air. You do have two chimney style vents on the top, it does have ram air type scoops that will push air down into the helmet. If you look at the back of the helmet there are some exhaust vents. This is the most effective way to keep a helmet cool because it draws the warm air right out the back of the helmet by creating an area of low pressure and it acts like a vacuum. You also have some static ports on the back here and it functions by also drawing the warm air right out the helmet. Finally out the base of the neck roll your also getting some exhaust vents, so that air that is pushed in will be able to flow through the entire helmet all the way out the back to keep you comfortable. Lets talk about removing the face shield because there is not a base plate system to use to remove the shield. What you do is you open this all the way and a little gray lever will pop right out. There is one on each side on the shield, all you do is simple pull up on those levers until they click and then once you have done that you can take the face shield and continue rotating it up and it will come right out. Very easy to remove and replace it just takes some practice to get used to it. Finally to replace it you will see there is a notch and you want to point that top corner to the top corner on the pod here. You simply push the shield back in until it does go any further and then close it and that's it so its back in and ready to go. There is no ratcheting system on an Arai face shield its just a smooth friction. Lets take a look at the inside at the features of the Arai RX-Q. First and for most it is a fully removable interior so you can pull this out you can wash it, or replace it if you need too. Another thing you will notice is they have brought over their emergency cheek pad release system from their race helmets, so it provides EMT's a way to remove the helmet without causing further neck injuries. You can see you just pull on that tab and the cheek pad is going to come right out of the helmet. You will see the orange tab has a note to notify emergency staff how to operate it. They can pull those right out while you are still wearing the helmet. What that does is it provides a much larger area for them to remove the helmet without them to cause further neck injury, you can see the neck roll comes right off as well. Now you see how much larger that opening will be so they can slide the helmet right off of your head. One thing that is unique about Arai helmets as well is when you pull the cheek pads out that is actually the raw shell, they actually put the EPS foam liner on the cheek pads itself. This is going to do a really good job at absorbing impact and you can see it is labeled 30mm which is the size of the cheek pads. Of course you can go up or down with the size depending on how they fit for you. What Arai has that is very unique is two things a facial contour system and a customizable cheek pad. There is a thin piece of foam here that can be removed or taken off. This helps for better fitment with the helmet if it is causing you be uncomfortable and it causes any pressure points. This is one way of customizing the fit of the helmet without having to go out and by brand new cheek pads. You will also notice they use different densities of foam throughout the construction of the cheek pad and they use their facial contour system. What this actually does is craddle you face and makes for better fitment of the helmet. You can remove the liners of the chin strap as well they just have a little yellow snap at the top, this is another area if your sweating a lot you want to be able to clean these up. The crown liner itself is attached with a couple of snaps and Arai uses a very low profile snap design. You will see some manufacturers have more larger snaps and that can get uncomfortable at times. The snaps from Arai actually stick to the snaps in the EPS liner and they run flush to the shell. You are getting very high levels of construction here with lots of different types of material to absorb moisture and wick it away from your head and also provide for lots of ventilation. They do this so when air does come inside the helmet it has a lot of space to transfer to your head and keep you comfortable. Last but not least you can see the interior here as I mentioned it is painted black for the factory model so it does look nice and finished. One thing you might be able to see here is you can see the exhaust port for that intake vent for vent on the face shield. This will direct air through a tunnel and down around to the side of your temple. You see the cheek pad is attached with a nice secure attachment point and it goes right into the shell itself. Last but not least you do have a small chin spoiler built in which you may think is kind of on the smaller side but what is really neat is you can extend it. Little attention to detail like this is what sets Arai different from other manufacturers and im not saying that there arent other good helmet manufacturers, definitely shop around and watch other product videos but the attention to detail that Arai puts into safety its very apparent in their construction. They are going for safety above all else. They don't look for any modern wild designs they look for safety first. You get a lot of bang for the buck even though it is a lot of bucks, Arai helmets will last you a long time. If you have any questions about them we have a lot of experienced people on the phone here at Competition Accessories and you can give us a call or shoot us an email, leave us a comment on our youtube channel and we will get back to you. Don't forget to like our facebook page and also if you subscribe to our youtube channel you with stay up to date with all of our product and video reviews. Last but not least even though this is expensive you can also earn up to 5% comp a cash back on future purchases. Thanks for watching this review of the Arai RX-Q and we will see you next time.
Hey guys this is Reuben with Competition Accessories and we have the all new Arai Signet Q helmet . The Signet was a very popular helmet for Arai they are bringing it back and replacing the profile in their line up , and what they've done is they have based the Signet Q off of the RXQ which is an intermediate helmet from Arai externally they look almost identical what they've done is they actually have elongated the Signet Q about 5 millimeters front to back its just going to be 5 millimeters longer and internally that internal shape is going to be a long oval. Arai has also done some pretty innovative things as far as customizing the fit of the helmet ill show you once we get into the interior what they've done some really neat features that really eliminate hot spots and that will allow you to have a very comfortable snug fit .Externally though again this is the RXQ this is the Signet Q, they look just about identical. Your going to have top vents that is going to open and close with rocker switches your going to have side exhaust cowls so as air flows over the helmet its going to draw warm air out the back and again out of the rear spoiler you have an open and close able vent that's going to draw warm air out the top , you also have a chin bar vent which is two position you can open it half way or all the way that's going to direct air onto the face shield just give you some extra air inside and lastly , and this is an Arai exclusive, they have vents actually built into the shield that direct air into the helmet and they have wind tunnels inside that direct air around on the side of your temples and your temporal artery is right at the side of your head and that really keeps you cool. You can see if i open the shield the little air ducts that directs air along the sides of your temples. One thing you may notice about the shield and well get into it once i take it off and ill show you exactly what it comes with but it actually has a reaccessed cavity built into the shield itself for a pin lock insert and the pin lock is actually included . Now if your comparing this to the Profile you may notice this is actually a wider eye port its 10 millimeters wider its the new SAI max shield which is the same as the RXQ so you just have a little better peripheral vision out of this helmet . As far as moving this shield its very simple a lot of people get a bit intimidated with Arai because it has side covers you cant really see whats going on but they are very easy to change. Basically once you open the shield all the way your going to see these two little trigger arms pop out there's a small little arrow on it basically what you do is pull it all the way up and its going to click on both sides, once you've pulled it up like that its ready to take off then all you do is grab the front of the shield and literally pull up and off . Again that's something that makes some people a little bit nervous but its very easy to do . I'm going to grab that pin lock insert if you've used a pin lock before you know it can be pretty challenging to get them in and out . Traditionally a pin lock shield has notches on either end of the insert which lines up with posts that correspond on the shield well Arai has done it a little bit differently. What they've done is they have actually molded a recess into the shield itself that this pin lock actually sits down into , and as far as installing it its a lot easier basically your just going to line up one end of the pin lock and then if you just push it down its just going to click right into place , that's so much easier then traditional pin lock systems. Id love to see other manufactures kind of follow in their foot steps because that's a lot more user friendly and a lot easier to change out as well. Obviously pin lock is going to basically make it duel layer lenses and what that does for you is number one that makes it a very very effective anti fog system if your riding in the colder environment or if its raining this pin lock is going to prevent fogging its also available with different color inserts in different tints so if you need a smoke insert you could do that and obviously other shields from the SAI max line up are going to fit on this helmet as well. To reinstall the SAI shield again this is something that may be intimidating some people because you cant really see whats going on here but basically your just going to take this notch line it up with the top part of this pod here and then you just insert it there kind of feel it click into place, Do the same for the other side. Once you have it in place like that basically your just going to close it and that's what actually is going to lock it into place. A little bit tricky to do it the first time once you've got the hang of it its actually pretty easy and a pretty nice system to swap out. Alright moving to interior of the Signet-Q Arai uses their dry cool fabric that is moisture wicking it keeps you very comfortable very dry it also pulls moisture away from your skin to keep you comfortable on warm days . You'll also notice there's a full neck roll on this helmet and what that does is a couple of things, One its just comfortable against your skin and Two maybe more importantly it prevents wind from entering the seams between the crack between the crown liner and the cheek pads , it just gives you a nice flush surface for the wind to travel over which significantly reduces wind noise as your riding . Another thing you might see here is these orange tabs those are notes to emergency personnel , if you have an accident and they need to remove your helmet basically what their going to do is pull on these tabs and that's going to reveal an orange pull tab right here and the cheek pads come right out its very simple, there's actually no snaps on these cheek pads its basically just have a notch on the front and back that kind of seat inside the helmet . You could also remove the entire neck roll. So that comes out and then as far as the lining there's two snaps at the back and two snaps at the front and that comes out very easy as well. ill give you a quick look at the interior of the helmet here . You can probably see there are some holes for the ventilation to come through to reach the skin on your head . And i do want to talk about as i mentioned in the beginning of the video, there's some features on this helmet to help customize the fit a little bit. This is the crown liner they actually provided some tear away pads on the sides of the temple so this is a long oval helmet and what that means is its for people with a longer head front to back and it eliminates hot spots on the forehead however everyone's temples are different as well some people have sunken temples some people have protruding temples . If you find this helmet fits great front to back but its a little bit tight on the sides , there are 5 millimeter pads in both sides so you can actually remove this it just comes right out and you can do that on both sides and that's going to give you just a little bit more room side to side and provide you with a very nice custom fit. Another thing you'll notice about this liner is it is completely open along the top and then that's just going to work with conjunction with the venting on the helmet to provide you with a lot of air flow. Next thing i want to show you is the cheek pads and i can actually remove the cover off of one of these and show you they actually use multiple layers , it doesn't come all the way off but, they use multiple layers of foam they call this the facial contour system . Basically you can see how its not just a flat single piece of foam like in cheaper helmets where basically it just kind of squishes on to your head you know you hope its comfortable, this has several layers of foam its contoured to cradle your face and then Arai has done something very innovative and they have basically put a spring inside this you can see as i press on that it gives . There's a couple things that does One when your pulling the helmet on and off its going to move the cheek pad out of the way your not feeling like your ripping your ears off every time you pull your helmet off but Two once the helmets on this spring is going to push back and its just going to give you a nice cradled feeling around your chin and your jaw bone and that's going to obviously provide a lot of comfort but it also reduces wind noise . Any time you have a better seal around the base of your helmet and around your face feel around the base thats a significant way to reduce wind noise its a very innovative feature i think a lot of people are going to really appreciate what that does for them . Now i don't have the interior of a Signet Q to show you but i do have one for the RXQ and i want to try and show you basically what Arai does in their construction that really sets them apart from everyone else . First is the EPS liner , you'll notice there's some different colors of foam here basically they have multiple densities of foam built into the liner but its a single piece . You can see their are denser parts of foam then there are softer parts depending on where you hit your head how you hit it if its a hard impact or just a lighter impact this is designed to dissipate the energy as much as possible so its going to spread the impact and its also going to cushion your head in an impact you can also see the ventilation holes , and again the RXQ is going to be very very similar to the Signet Q because they have basically based the Signet off the RXQ its just going to be a little bit longer front to back . The other thing that i have up here is the shell itself Arai uses what they call super complex laminate construction its basically a blend of fiber glass and other materials . There's a few things you'll notice about it when you actually pick it up an hold it but the biggest thing about Arai helmets is they are incredibly incredibly strong this is obviously not a complete helmet its a shell but still its incredibly stiff i mean i can push very very hard on the chin bar here and its not giving at all it is a very very stiff shell and what that's going to do for you again is dissipate energy in impact its going to spread the energy to a larger area so that you don't get injured . You'll also see that they have some other layers of material on the top of the shell , So again different parts of the shell are reinforced in different ways they use a ridge around the chin bar and around the base of the helmet just again provide that level of stiffness , and another thing you'll notice about Arai and this is huge for them their shield changing mechanism does not interfere with the shell that's why they have the pods on the sides. Instead of having a big recess here that might compromise the safety of the helmet its basically just a flat uniform piece it does go in just a tiny bit but if you compare that to other helmets some have a significant dip here where it might compromising the entire shell . Arai looks at the structure of an egg and that's what they base their shell shape off of.They keep it very simple very rounded so that it will prevent any weak spots on the shell itself and again that's just part of what your paying for with Arai i mean we know they are not cheep helmets , but again you do get what you pay for. So that's the Arai Signet Q in a nut shell again were very excited to see this in their line up a lot of people were having trouble with the Arais not fitting them if you have more of a long oval head shape because the Signet was not in the line up but they brought it back so were excited to see it. You can check these out online at Competition Accessories .com And well see you next time.
Information and Details about the Arai SAI Replacement Mirrored Iridium Shields and Visors
made by Arai
Make your Arai look the best it can.. Plus keep the sun out of your eyes. These are Genuine Arai Replacement shields with an Iridium coating that is mirrored and almost allow no vision into your helmet, but it looks like a mix between a light smoke and dark smoke from the inside.
  • Fits the Corsair V, Signet Q, Vector 2 and RX-Q, and Defiant Helmets
  • Note: be careful wiping it. This is a harder coating, but similar to high end sun glasses. So, abrasion can scratch the coating.

  • Arai SAI Replacement Mirrored Iridium Shields and Visors Product Reviews
    Be the first to review this product! Review this Product  for a chance to win a $100 gift card.

    Part Number Status for Arai SAI Replacement Mirrored Iridium Shields and Visors
    Options SKU Our Price Availability
    Iridium Silver AR-SAIS-SV $75.83 Currently Not Available for Order
    Iridium Blue AR-SAIS-BL $53.08 Currently Not Available for Order
    Iridium Gold AR-SAIS-GLD $53.08 Currently Not Available for Order

    Help us improve our site...
    Order Securely Online Anytime

    Siteseal Competition Accessories, LLC BBB Business Review
    Facebook Twitter Google+ YouTube
    Arai SAI Replacement Mirrored Iridium Shields and Visors - All Colors
    All Colors
    Arai SAI Replacement Mirrored Iridium Shields and Visors - Iridium Silver
    Iridium Silver
    Arai SAI Replacement Mirrored Iridium Shields and Visors - Iridium Blue
    Iridium Blue