The all-new Vortice is constructed of leather-like (but way stronger & lighter) Lorica, lined with Teflon vented mesh, with soft Cambrelle in the toe area. In the upper rear is the Techno Calf Tensioner to custom fit your calves, and up front, the Techno Shin Tensioner that helps close the leg upper on the front part of the boot. There's also the Techno Instep Tensioner, a GP-proven safety feature. The Vortice Boots also have an air ventilation system, with adjustments on the toe area and outer-lower section.
The new Sidi Vortice is CE certified
Comes in non-vented Hi-Viz Yellow Black 42-47
The shock absorbing heel cup insert moves under impact and the front slider is made of nylon-reinforced fiberglass with an air intake and alloy insert
Underneath you'll find a poly/rubber blend sole with a replaceable center sole insert
Also, like other Sidi boots, all the parts can be replaced
Finding your foot measurements:Trace around the foot, while standing with the feet flat on the floor.
Do this for both feet, as you will use the largest of the two measurements to find your size.
Mark the outer edges, and the top and bottom points of your tracing.
Measure from the top to the bottom to get your size measurement, and from side to side to get the width.
| Sidi Boots |
|---|
| USA MENS SIZE | METRIC SIZE | USA WOMENS SIZE |
| 3 - 3 1/2" | 36 | 4 1/2 - 5" |
| 4 - 4 1/2" | 37 | 5 1/2 - 6" |
| 5 - 5 1/2" | 38 | 6 1/2 - 7" |
| 5 1/2 - 6" | 39 | 7 - 7 1/2" |
| 6 1/2 - 7" | 40 | 8 - 8 1/2" |
| 7 - 7 1/2" | 41 | 8 1/2 - 9" |
| 8 - 8 1/2" | 42 | 9 1/2 - 10" |
| 9 - 9 1/2" | 43 | 10 1/2 - 11" |
| 9 1/2 - 10" | 44 | 11 - 11 1/2" |
| 10 1/2 - 11" | 45 | 12 - 12 1/2" |
| 11 - 11 1/2" | 46 | 12 1/2 - 13" |
| 12 - 12 1/2" | 47 | - |
| 13 - 13 1/2" | 48 | - |
| 14" | 49 | - |
| 15" | 50 | - |
The sizing information is provided by the manufacturer and does not guarantee a perfect fit. However, we are happy to assist you with any needed exchanges.
