Used mostly as marker, running, turn or brake lights
Extremely bright and will give you the extra amount of lighting you need on the rear
Made from die cast aluminum, polished to a fine finish and then given our 6 step double copper show chrome plate finish
About 1 1/4" around
20 watts
Offered in 3 different mounting styles so make sure what you need before ordering
Sold in pairs only
With Adjure's different mounting brackets they will fit Harley Davidson, Victory, Triumph, Yamaha, Honda, Kawasaki, Suzuki and just about any and all motorcycles
RSS Design:The way we hold the bezel to the housing is called our RSS design which stands for Reverse Set Screw. There are 4 threaded holes 90 degrees apart on the housing of all of our motorcycle bullet lights. According to the way you mount the bullets, you put the set screw in the bottom hole with a drop of blue thread locker (included) and screw it in until it is flush with the housing. You then push the bezel over the o-ring until it is flush with the housing so that the hole in the bezel lines up directly over the set screw. You then turn the set screw counter clockwise (loosen) until it is tight against the bezel. No more lost bezels!
