Competition Accessories

Don't miss a thing! Follow us on: Facebook   Google+   Twitter   Youtube  |  Shop at Competition Accessories

Winter is almost here, and you’re going to need a little extra help to keep you comfortable when riding in cooler tempertures. Riding with heated gear is a great way to not only stay comfortable, but also stay safe. As you ride, cold wind can sometimes cut through even the most insulated gloves, causing your hands to get numb and have an effect on your grip and reflex with your clutch. Heated gloves and Heated glove liners solve this problem by giving you direct heat to your hands. In this Comparsion we’ve taken a few Heated Motorcycle Glove options that we particularly like, and analyzed their features. Be sure to also take a look at our Heated Glove Guide video for a more in-depth analysis. For more heated glove options, or to see our wide selection of heated motorcycle gear/heated gear brands check out our website: CompetitionAccessories.com!

 

Tourmaster Synergy 2.0 Electric Leather Gloves

 

The Tourmaster Synergy 2.0 Electric Leather gloves have been designed to operate in all weather conditions, and has the ability to run from a vehicle’s 12-volt electrical system. The Synergy 2.0 Leather gloves offer warmth without bulk or discomfort to provide an overall better feel and a safer ride. The lightweight, flexible steel fiber heating elements generate even, overall warmth. Expanding panels have been incorporated into the gloves for a fine tuned fit. The Tourmaster Synergy 2.0 have a water-resistant single, or dual rheostat.

 

Tourmaster Synergy 2.0 Textile Gloves

 

The Tourmaster Synergy 2.0 Textile Gloves are made from comfort stretch fabric with a goatskin palm construction. There is also a rainguard waterproof/ breathable barrier. A Clarino palm panel helps to resist grip wear, and 100gm Polyfill insulation increases warmth and heat retention. Lightweight, flexible carbon fiber heating elements provide consistent, even heat. The Synergy 2.0 Textile gloves can easily and accurately adjust through three heat levels. Action Expansion Panels have been incorporated into the design to help fine tune fit and increase comfort. The interior of the gloves have a soft, Bemberg lining. These heated gloves have been designed to be worn either separately or in conjunction with other Synergy garments.

 

Firstgear Warm & Safe Heated Passenger Gloves

 

These DC heated gloves produce 15watts of heat at 12.8 Volts. The gloves have a grade A top grain, drum-dyed cowhide construction with a Porelle breathable/waterproof membrane. Wearing the Firstgear Warm & Safe Heated Passenger Gloves will supply you with an even, ‘all-over’ heat that will flow to your palms, fingers, thumbs and back of hand. As a convenience feature, the Passenger gloves have ‘pre-curved’ fingers, as well as an elastic wrist/ adjustable hook & loop gauntlet closure. The Passenger gloves should be used with a Firstgear Heat-Troller (heat controllers are sold separately). The Firstgear Warm & Safe Heated Passenger Gloves come with a 2 yr. Limited warranty. A DC Coax Y-Harness is required when not using the Warm & Safe Jacket Liner.

 

Firstgear Warm & Safe Heated Glove Liners

 

The Firstgear Warm & Safe Heated Glove Liners fit underneath most non-heated winter riding or work gloves. These light, thin gloves are soft to the touch. With a 95% polyester and 5% spandex construction, the spandex helps provide a custom fit. The glove liners can be plugged into the Jacket liner, or they can be used separately. 11 watts of heat go to each glove. The Firstgear Warm & Safe Heated Glove Liners have a two year limited warranty.

Firstgear Warm & Safe Heated Carbon Gloves

 

The Firstgear Warm & Safe Heated Carbon Gloves are DC heated and produce 15 watts of heat at 12.8 Volts. The Carbon gloves have a Grade A top grain, drum dyed cowhide construction, with a porelle breathable/waterproof membrane. For protection, there is carbon-fiber armor over the knuckles, and for increased visibility, there is reflective piping throughout. Some additional convenience features include: pre-curved fingers, an elastic wrist/adjustable hook & loop gauntlet closure, and a finger-mounted, rubber, face shield wiper. The Warm & Safe Heated Carbon Gloves should be used with a Firstgear Heat-Troller (heat controllers sold separately). A DC Coax Y-harness is required when not using in conjunction with the Warm & Safe Jacket Liner. These gloves come with a 2-year warranty.

 

Mobile Warming Heated TX Gloves

 

 

 

The Mobile Warming Heated TX Gloves have a 500 Denier Carbolex Shell. These Mobile Warming gloves have a Nanomax waterproof membrane, as well as an Exkin Air waterproof membrane. The gloves come with two 7.4V 2.2Ah rechargable lithium-ion batteries and charger; and provide up to 10hours of warmth.


Related Posts Plugin for WordPress, Blogger...

Leave a Reply