The Klim Traverse Jacket and Pants Set has been constructed to be weatherproof and low maintenance. This suit has been designed specifically for enduro and off-road riders; this is evident by Klim’s use of 840 denir Condura overlays in high wear areas. This fabric (Condura) has been specially made for enduro and off-road garments.
Klim Traverse Jacket
The Klim Traverse Jacket is made out of heavy duty nylon with a GORE-TEX core to protect the rider from the elements while also drawing moisture away from the body. The liner is a moisture wicking, polyester mesh. The jacket has several storm flaps that cover closures and various storage areas. These storage areas include: two hand pockets, one chest pocket, and one internal pocket. Each of these pockets have YKK zipper closures (and each zipper has “glove friendly” pulls). The use of storm flaps in conjunction with YKK zippers help make the Klim Traverse jacket completely waterproof. The Traverse jacket has built-in ventilation with two adjustable pit vents with two-way YKK zippers, and a lateral, adjustable back vent. For a better fit, the jacket has adjustable hook and loop cuffs with an inner gasket. This Klim jacket has been designed to wear over a polyester base layer, and the close fit reduces drag. The sleeves of the jacket have been articulated for rider positioning. There are shoulder and elbow pad pockets for armor removal and/or replacement. For nighttime visibility, there are 3M Scotchlite Industrial grade 9910 reflective panels. The collar of the Traverse Jacket is lined with a soft, micro fleece, and the bottom hem has shock cord adjusters.
Klim Traverse Pants
Like the jacket, the Klim Traverse Pants are made from heavy duty GORE-TEX fabrics with genuine leather panels on the inner leg. They have been lined with a moisture-wicking polyester mesh liner with Cordura on the inner knee. There are waist adjusters on the nylon webbing belt. Velcro cuffs allow the pants to fit over boots. There is also gathered elastic in the rear waist band for a better fit. As an extra precaution to keep water from leaking into the pants, the main YKK zipper closure has been covered by both an internal and external storm flap. For ventilation, there are two front, zippered, thigh intake vents; as well as two rear, zippered thigh intake vents. The hip and knee pads have been placed in pockets to make them easy to remove and/or change. The Traverse pants have been designed to be worn over a polyester base layer, and have articulated seat and leg patterning. They also have the same 3M Scotchlite Industrial Grade 9910 Reflective Panels as the jacket for premium nighttime visibility.